The Miniserver will send a message to all users that the password has been reset. Then turn the power supply back on and the Server will boot. Remove the SD card from the computer and place it into the Server. The new password will be saved to the SD card and the windows can be closed.ħ. Enter a new password for the user admin:Ħ. Select the drive that contains the SD card.ĥ. A window will open, that will guide you through the reset process step by step:Ĥ. You can also find this feature on the start page or by hittingģ. Open Loxone Config and select the “SD Card” in the Periphery tree. Please note that the Miniserver’s firmware on the card must also be on version 12 for this to work.Ģ.
Loxone Config version 12 and higher allows resetting the password using the SD card of the Miniserver. The Miniserver will either obtain an IP address from the DHCP server or, if not available, the IP address will default to 192.168.1.77. Then turn the power supply back on and the Server will boot from the new card.įormatting with factory settings will also reset the network settings. Remove the SD card from the computer and insert it into the Server, with the power switched off. If a backup is being restored, you can hit “Yes”.ġ0. Select “No” to create a card with factory settings.
If the SD card already contains a Loxone file system, the following warning will be displayed: After selecting the SD card and a (optional) backup, click on “Format” and confirm with “Yesĩ. 1, Audioserver) that the card should be created for.Ĩ. Select the type of device (Miniserver, Miniserver Gen. This is where backups that are no longer needed can be deleted from the PC.ħ. If you want to create an SD card with factory settings, do not select a backup here.Ħ. This is where you can select the backup to be restored to the SD card. Use this drop-down menu to filter the listed backups for specific devices.ĥ. Select the drive that contains the SD card.Ĥ. Open Loxone Config and select either the Miniserver or Audioserver’s “SD Card” in the Periphery Tree.ģ. This way you can minimize downtime when swapping out the card.Ģ. Switch off the power supply to the Server, remove the micro SD card and insert it into the computer’s reader.Īlternatively, you can use a new SD card, which you can prepare while the Server is still running with the old card. Insert the card into the card reader of the computer or use a USB card reader. The SD card for the Miniserver or Audioserver is formatted on a PC or notebook using the Loxone Config software. If the Miniserver notifiied you of SD card errors, we recommend that you replace the card as soon as possible. These extensively tested industrial cards guarantee error-free operation and functionality! This procedure will also restore the Audioserver’s ability to be paired with the Miniserver.
0 kommentar(er)
